Back

All Courses at Austra College

Austra College delivers 25 courses — 24 nationally recognised VET qualifications across seven training packages (Hospitality, Construction, Automotive, IT, Leadership & Management, Furniture Making and Engineering) plus an ELICOS English language program — from campuses in Melbourne, Sydney, Perth and Adelaide.

0

Courses — 24 VET Qualifications across 7 packages, plus ELICOS

0

Campuses — Melbourne, Sydney, Perth, Adelaide

0 %

Of persistent occupation shortages are trades & technicians — JSA 2025

0 %

Of VET completers reported improved employment status — NCVER 2025

How do I choose the right course?

Work through these five questions in order — they filter out most wrong choices in under ten minutes.

Do you want to work with your hands or lead a team?

Foundational cookery skills, kitchen operations, and food safety. The entry point into a career as a qualified cook.

What’s your current level?

Certificate III is trade-entry. Certificate IV assumes foundational skills. Diploma and above assume prior study or experience.

Where do you want to live and work?

Most courses run across all four campuses. Five construction and engineering trade courses — Stonemasonry, Joinery, Roof Plumbing, Wall and Ceiling Lining, and Engineering (Fabrication Trade) — are currently Melbourne and Sydney only.
Are you a domestic or international student?
International applicants must choose a CRICOS-registered course delivered full-time on campus.

Where does it lead next?

A good course should credit into a higher qualification — check the pathway before enrolling, not after.

What courses can I study at Austra College?

Browse by industry. Certificate III through Graduate Diploma, aligned to the Australian Qualifications Framework and delivered by RTO 40336. Courses marked TRADE COURSE are Certificate III, on-tools qualifications. Courses marked MEL + SYD are currently delivered only at our Melbourne and Sydney campuses — everything else is offered across all four campuses.

Hospitality & Commercial Cookery (SIT)

Practical kitchen and hospitality training in commercial-standard simulation kitchens, from trade-entry cookery through to venue management.

SIT30821

Certificate III in Commercial Cookery

SIT40521

Certificate IV in Kitchen Management

SIT50422

Diploma of Hospitality Management

SIT60322

Advanced Diploma of Hospitality Management

Construction Trade Courses (CPC)

The largest trade course cluster at Austra College — six on-tools construction trades plus a builder-level diploma.

CPC30220

Certificate III in Carpentry

CPC30620

Certificate III in Painting and Decorating

CPC31020

Certificate III in Solid Plastering

CPC31420

Certificate III in Construction Waterproofing

CPC33020

Certificate III in Bricklaying and Blocklaying

CPC31220

Certificate III in Wall and Ceiling Lining

CPC31920

Certificate III in Joinery

CPC32320

Certificate III in Stonemasonry

CPC32620

Certificate III in Roof Plumbing

CPC50220

Diploma of Building and Construction (Building)

Automotive Courses (AUR)

Workshop-based training in light vehicle servicing, fault diagnosis and automotive technology.

AUR30620

Certificate III in Light Vehicle Mechanical Technology

AUR40226

Certificate IV in Automotive Mechanical Diagnosis

AUR50216

Diploma of Automotive Technology

Furniture Making & Glazing (MSF)

Hands-on trades that sit between construction and manufacturing — workshop precision work.

MSF30322
Certificate III in Cabinet Making and Timber Technology

MSF30422

Certificate III in Glass and Glazing

Engineering & Fabrication (MEM)

Workshop-based metal fabrication, cutting, forming and welding skills for the engineering and manufacturing sector.

MEM31925

Certificate III in Engineering – Fabrication Trade

English Language (ELICOS)

A six-level General English program, from Beginner to Advanced, for students building English skills for everyday life and further study.

ELICOS

General English — Beginner to Advanced (6 levels)
ELICOS is an English language program, not a VET qualification, and runs at all four Austra College campuses.

ELICOS is an English language program, not a VET qualification, and runs at all four Austra College campuses.

Information Technology (ICT)

ICT60220

Advanced Diploma of Information Technology

Leadership & Management (BSB)

Business qualifications for supervisors, team leaders and managers, including a postgraduate-level Graduate Diploma.

BSB40520

Certificate IV in Leadership and Management

BSB50420

Diploma of Leadership and Management

BSB80120

Graduate Diploma of Management (Learning)

Why do trade courses in Australia have such strong job outcomes?

Employers across construction, hospitality, automotive and engineering are having real difficulty finding qualified staff. Jobs and Skills Australia’s 2025 Occupation Shortage List found Technicians and Trades Workers make up the largest share of the country’s persistent occupational shortages, and trade vacancies are being filled at a noticeably lower rate than the national average — employers are advertising these roles and simply not getting enough suitable applicants.

The training itself holds up under scrutiny too. NCVER’s most recent VET student outcomes survey found that most graduates finish with an improved employment status, achieve the training goal they set out to reach, and report being satisfied with the course. That combination — real demand from employers plus training that reliably does what it says — is what makes a Certificate III trade qualification a genuinely practical choice, not just a marketing line.

Where can I study trade courses in Australia with Austra College?

Most courses run at all four campuses. Five Melbourne/Sydney-only trade courses are marked on the course list above. Confirm exact availability and intake dates with a course advisor before applying.

Melbourne

LEVEL 5/131 QUEEN ST MELBOURNE VIC 3000

All 25 courses, including all Melbourne/Sydney-only trades.

Sydney (Granville)

LEVEL 2/133 PARRAMATTA RD
GRANVILLE NSW 2142

All 25 courses, including all Melbourne/Sydney-only trades.

Perth
LEVEL 2/440 WILLIAM ST PERTH WA 6000
Standard course range — excludes Melbourne/Sydney-only trades.

Adelaide

LEVEL 3/90 KING WILLIAM ST ADELAIDE SA 5000

Standard course range — excludes Melbourne/Sydney-only trades.

Can international students study trade courses in Melbourne and other campuses?

Yes. Austra College is registered on CRICOS (CRICOS Code: 03187D), meaning our qualifications are registered for delivery to international students.

Study mode

On-campus and full-time. Practical trade training is delivered in workshops, training environments and simulation kitchens, so attendance is hands-on by design.

English requirements

Vary by qualification and AQF level. Certificate III courses generally have lower requirements than Diploma and Advanced Diploma courses — confirm on the individual course page.
Packaged study plans
Many international students combine a Certificate III with a Certificate IV or Diploma — for example, SIT30821 → SIT40521 → SIT50422.

Campus choice

Course availability differs by campus and intake, so confirm your qualification is running at your preferred campus before you apply.

Entry requirements and application conditions vary by individual circumstances. Speak to an Austra College course advisor or education agent for advice on your situation.

What career progression do Austra College courses lead to?

Most qualifications stack. Each level opens the next.
Start here Progress to Then to
SIT30821 — Cert III Commercial Cookery SIT40521 — Cert IV Kitchen Management SIT50422 Diploma → SIT60322 Advanced Diploma Hospitality Management
CPC30220 — Cert III Carpentry CPC50220 — Diploma of Building and Construction Builder registration (set by each state/territory regulator)
AUR30620 — Cert III Light Vehicle AUR40226 — Cert IV Automotive Mechanical Diagnosis AUR50216 — Diploma of Automotive Technology
BSB40520 — Cert IV Leadership BSB50420 — Diploma of Leadership and Management BSB80120 — Graduate Diploma of Management (Learning)
Diploma and Advanced Diploma graduates may also receive credit toward a related bachelor’s degree, depending on the university’s admission arrangements. Licensing for trades (such as builder or electrical licensing) is administered by each state or territory regulator — a qualification alone does not automatically grant a licence.
What are VET courses in Australia?

VET (Vocational Education and Training) is Australia’s national system of practical, industry-linked qualifications delivered by registered training organisations — assessed on units of competency rather than exams. 5.1 million domestic and international students were enrolled in nationally recognised VET in 2025 (NCVER).

Nationally recognised

A qualification earned in Perth is valid in Brisbane, Darwin or Hobart. Course codes (SIT, CPC, AUR, ICT, BSB, MSF) are set nationally, not by individual colleges.

AQF-aligned

Each qualification sits at a defined level on the Australian Qualifications Framework — Certificate III (AQF 3) through to Graduate Diploma (AQF 8).

Regulated

RTOs are audited by the Australian Skills Quality Authority (ASQA). Courses delivered to international students must also be registered on CRICOS.

What’s the difference between
a VET course and a trade course?

Every trade course is a VET course, but not every VET course is a trade course. A trade course trains you for a specific hands-on occupation — carpenter, chef, motor mechanic, roof plumber, cabinet maker, bricklayer — typically at Certificate III level with substantial practical assessment. A non-trade VET course, like the BSB50420 Diploma of Leadership and Management, builds professional capability without tying you to one on-tools occupation. ELICOS General English sits outside the VET system entirely — it’s a separately regulated English language program, not a nationally recognised VET qualification.

Frequently Asked Questions

Austra College offers 25 courses in total: 24 nationally recognised VET qualifications across seven training packages — Hospitality (SIT), Construction (CPC), Automotive (AUR), Information Technology (ICT), Leadership and Management (BSB), Furniture Making (MSF) and Engineering (MEM) — from Certificate III through to Graduate Diploma, plus a six-level ELICOS General English program.
Austra College delivers trade qualifications including Certificate III in Carpentry, Painting and Decorating, Solid Plastering, Construction Waterproofing, Bricklaying and Blocklaying, Wall and Ceiling Lining, Joinery, Stonemasonry, Roof Plumbing, Commercial Cookery, Light Vehicle Mechanical Technology, Cabinet Making and Timber Technology, Glass and Glazing, and Engineering (Fabrication Trade), plus Certificate IV and Diploma-level progression qualifications. Wall and Ceiling Lining, Joinery, Stonemasonry, Roof Plumbing and Engineering (Fabrication Trade) are currently delivered only at the Melbourne and Sydney campuses.
Austra College has four campuses: Level 5/131 Queen Street Melbourne, Level 2/133 Parramatta Road Granville (Sydney), Level 2/440 William Street Perth, and Level 3/90 King William Street Adelaide. Most courses run at all four; five construction and engineering trade courses currently run only at the Melbourne and Sydney campuses.
Yes. Austra College is a registered training organisation (RTO Code: 40336) delivering nationally recognised qualifications aligned to the Australian Qualifications Framework and regulated by the Australian Skills Quality Authority.
Yes. Austra College is registered on CRICOS (CRICOS Code: 03187D). International students can enrol in CRICOS-registered trade courses in Melbourne and at our Sydney, Perth and Adelaide campuses, studying face-to-face and full-time on campus. Entry requirements vary by qualification — confirm on the individual course page.
Yes. Austra College offers ELICOS General English, a six-level program from Beginner to Advanced, at all four campuses — Melbourne, Sydney, Perth and Adelaide. ELICOS is an English language program, not a VET qualification, and is registered separately on CRICOS.
No, for Certificate III qualifications. Certificate III is a trade-entry level and assumes no prior trade qualification. Diploma, Advanced Diploma and Graduate Diploma courses typically expect prior study or relevant workplace experience.
Duration varies by qualification, campus and study load. Exact course duration is listed on each individual course page — check there or speak to a course advisor.
Not automatically. Trade licensing and builder registration are administered separately by each state and territory regulator. A nationally recognised qualification is usually a prerequisite, but additional experience or licensing steps may apply.

25 courses. 4 campuses. One clear next step.

Austra College delivers 24 nationally recognised VET qualifications across construction, commercial cookery, automotive, engineering and furniture making, plus an ELICOS English language program, from campuses in Melbourne, Sydney, Perth and Adelaide. Every VET course is AQF-aligned, delivered by an ASQA-regulated RTO and registered on CRICOS for international students, with clear stacked study pathways from Certificate III through to Graduate Diploma.
HIGHLY RECOMMENDED BY
Australian Achiever
Awards 2026
Student Handbook

Student Handbook

Call Now