Develop practical skills for fabrication work in metal, engineering, manufacturing and associated industries. This qualification covers technical drawing, engineering measurements, safe work practices, cutting, forming, shaping and welding.
Students learn to use hand tools, power tools and workshop machines, perform soldering and brazing, apply routine welding processes, monitor fabrication quality and carry out basic testing activities.
This qualification must be undertaken through a Training Contract or through formal trade recognition assessment processes. Contact Austra College to discuss the applicable pathway and required arrangements before applying.
Some units may relate to licensing or regulatory requirements in particular jurisdictions. Consult the relevant regulatory authority to confirm the requirements that apply to the work you intend to undertake.
Entry Requirements
There are no mandatory training package entry requirements. The Training Contract or formal trade recognition requirement above still applies. Austra College requires international applicants to meet the following admission requirements:
- Be at least 18 years of age.
- Have satisfactorily completed Year 10 or higher.
- English language requirements
Provide evidence of one of the following English language test results:
| IELTS (General or Academic) overall | PTE Academic | TOEFL iBT | CAE Scale |
|---|---|---|---|
| 6.0 | 47-54 | 60-78 | 169-175 |
Results older than two years are not accepted for offshore applicants.
Alternatively, provide evidence of at least five years of study in English in Australia, Canada, New Zealand, the Republic of Ireland, South Africa, the United Kingdom or the United States; or evidence that, within two years of the application date, you have successfully completed in Australia a foundation course, a senior secondary certificate of education, or substantial components (50% or more units according to the training package) of an Australian Qualifications Framework Certificate IV or higher qualification while on a student visa.
Contact Austra College admissions to discuss any other English language entry pathway and the evidence required.
Onshore and Offshore International Students
- All international students must complete a Pre-Training Review, including a Language, Literacy, Numeracy and Digital literacy (LLND) assessment. The review identifies previous education and training, relevant work experience, individual training needs and course suitability. It may be conducted by video call or phone.
Other Conditions:
- Students must complete CPCWHS1001 Prepare to work safely in the construction industry before any construction site visits.
- Allow approximately 4 hours per week for self-directed learning, self-study and assessments during training weeks, excluding term breaks.
- Use personal protective equipment (PPE) appropriate to each fabrication activity. This includes eye and hearing protection, a welding helmet or face shield, suitable respiratory protection, steel-capped safety boots, heat- and cut-resistant welding gloves, high-visibility clothing, head protection and fire-resistant protective clothing or an apron, as required for the activity.
Learning Pathways
Successful completion may support progression to further study, subject to the receiving
provider’s admission requirements. Pathways listed in the TAS include:
- CPC40120 Certificate IV in Building and Construction
- CPC50220 Diploma of Building and Construction (Building)
Career Pathways
Potential occupational pathways include:
Fabricator
Welder
Boilermaker
Metal fabricator
Structural steel fabricator
Fitter (fabrication)
These pathways describe possible roles. Employment depends on individual skills, experience and employer requirements. Austra College does not guarantee employment, job placement or a particular career outcome.
Duration
Full time over a period of 52 weeks, inclusive of 4 weeks of holiday breaks.
- Classroom sessions are 20 hours per week during training weeks.
- Allow approximately 4 hours per week for self-directed learning and assessments during training weeks.
Training support is available after class or by appointment, in person, by phone, video call or email. Trainers and assessors monitor self-guided learning.
Fees
| Tuition Fees | $16,500 |
| Non-Tuition Fees | |
| Application Fees | $500 |
| Material Fees | $3000 |
| Total Course Fee | $20,000 |
Course Outline
The course includes 35 units of competency: 12 core units and 23 elective units. The qualification requires 96 points, comprising all core units totalling 33 points, at least 40 elective points from Groups A to G, and up to 23 elective points from Group H to reach the total.
The selected units are listed below. C = Core; E = Elective.
| Core Units | ||
| No | Unit Code | Unit Title |
| 1 | MEM09002 | Interpret technical drawing |
| 2 | MEM11011 | Undertake manual handling |
| 3 | MEM12023 | Perform engineering measurements |
| 4 | MEM12024 | Perform computations |
| 5 | MEM13015 | Work safely and effectively in manufacturing and engineering |
| 6 | MEM14006 | Plan work activities |
| 7 | MEM16006 | Organise and communicate information |
| 8 | MEM17003 | Assist in the provision of on-the-job training |
| 9 | MEM18001 | Use hand tools |
| 10 | MEM18002 | Use power tools/hand held operations |
| 11 | MEM16008 | Interact with computing technology |
| 12 | MSMENV272 | Participate in environmentally sustainable work practices |
| Elective Units | ||
| No | Unit Code | Unit Title |
| 1 | MEM05003 | Perform soft soldering |
| 2 | MEM05004 | Perform routine oxy fuel gas welding |
| 3 | MEM05005 | Carry out mechanical cutting |
| 4 | MEM05006 | Perform brazing and/or silver soldering |
| 5 | MEM05007 | Perform manual heating and thermal cutting |
| 6 | MEM05009 | Perform automated thermal cutting |
| 7 | MEM05010 | Apply fabrication, forming and shaping techniques |
| 8 | MEM05012 | Perform routine manual arc welding |
| 9 | MEM05014 | Monitor quality of production welding/fabrications |
| 10 | MEM05037 | Perform geometric development |
| 11 | MEM05049 | Perform routine gas tungsten arc welding |
| 12 | MEM05050 | Perform routine gas metal arc welding |
| 13 | MEM05052 | Apply safe welding practices |
| 14 | MEM05056 | Perform routine flux core arc welding |
| 15 | MSMENV472 | Implement and monitor environmentally sustainable work practices |
| 16 | MEM07032 | Use workshop machines for basic operations |
| 17 | MEM13019 | Undertake work health and safety activities in the workplace |
| 18 | MEM16004 | Perform internal/external customer service |
| 19 | MEM16005 | Operate as a team member to conduct manufacturing, engineering or related activities |
| 20 | MEM18003 | Use tools for precision work |
| 21 | MEM18011 | Shut down and isolate machines/equipment |
| 22 | MEM18110 | Perform basic penetrant testing |
| 23 | MEM18111 | Perform basic magnetic particle testing |
Delivery Mode and Assessment
The course uses a classroom blended delivery model, combining face-to-face classroom sessions, guided learning, theory assessments completed at home and practical training in a simulated workplace environment.
Assessment includes knowledge tests and practical demonstrations, simulations or role plays, as required by each unit. Summative theory assessments are completed outside the classroom. Practical assessments take place in classroom and simulated environments where permitted by the unit requirements.
Where a unit requires assessment in a functioning workplace, students must provide evidence of performance in that environment, with sufficient tasks and materials to meet the unit requirements. Contact Austra College to confirm the workplace assessment arrangements for your pathway.
Students must meet all required training and assessment requirements to achieve the qualification. Course completion is not guaranteed.
Recognition of Prior Learning (RPL) and Credit Transfers (CT)
Recognition of Prior Learning
Students may apply for RPL using evidence of formal study, non-formal training and skills developed through work or other experience. Evidence is assessed against the requirements of the relevant units. Apply before or immediately after enrolment, and before delivery of the relevant units begins. Contact Austra College for its RPL policy, procedure and qualification-specific RPL kit.
To know more about how RPL is conducted please refer to the following documents:
RPL policy and procedure
RPL kit for the qualification
How prospective learners will be made aware of RPL
Prospective learners will be informed of the RPL policy and process prior to enrolment via website, Student handbook and pre-training review, enrolment, and course commencement stages.
Credit Transfers (CT):
Delivery Locations
This course is offered in Melbourne and Sydney only.
| Location | Description |
|---|---|
| Melbourne | |
| Level 5, 131 Queen Street Melbourne VIC 3000 | Classroom |
| Sydney | |
| Level 2/133 Parramatta Road, Granville NSW 2142 | Classroom |
Students will be informed of the simulation workshop location at least 1 week before classes commence.
About this qualification
MEM31925 Certificate III in Engineering – Fabrication Trade develops skills for fabrication work through technical learning and practical activities. The selected units cover metal cutting, forming and shaping, routine welding, soldering and brazing, engineering measurements, quality monitoring, basic penetrant testing and basic magnetic particle testing.
Students who successfully meet all qualification requirements receive MEM31925 Certificate III in Engineering – Fabrication Trade and a transcript of unit results. Students who do not complete the qualification may request a Statement of Attainment for units assessed as competent.
