Course Overview: Certificate III in Roof Plumbing
Develop skills in installing, maintaining and repairing metal roof and wall cladding, flashings, gutters, downpipes and other rainwater products for residential, industrial and commercial buildings. The Certificate III in Roof Plumbing combines common plumbing industry skills with specialist roof plumbing training. Occupational title: Roof plumber, Licensing, legislative, regulatory and certification requirements vary between states and territories. Consult the relevant regulatory authority about requirements for the work you intend to undertake. Completing this qualification does not automatically grant a licence.
Students must complete CPCWHS1001 Prepare to work safely in the construction industry before any construction site visits.
Entry Requirements
There are no mandatory training package entry requirements. Austra College applies the following admission requirements for international students:
- Minimum age of 18 years.
- Satisfactory completion of Year 10 or higher.
English language requirements
Provide evidence of one of the following English language test results:
| IELTS (General or Academic) overall | PTE Academic | TOEFL iBT | CAE Scale |
|---|---|---|---|
| 6.0 | 47-54 | 60-78 | 169-175 |
Results older than two years are not accepted for offshore applicants.
Alternatively, provide evidence of:
- At least five years of study in English in Australia, Canada, New Zealand, the Republic of Ireland, South Africa, the United Kingdom or the United States; or
- Within two years of the application date, successful completion in Australia of a foundation course or senior secondary certificate of education, or substantial components (50% or more units) of an Australian Qualifications Framework Certificate IV or higher qualification while on a student visa.
Contact Austra College admissions to discuss any other English language entry pathway and the evidence required.
Onshore and Offshore International Students
- All international students must complete a Pre-Training Review, including a Language, Literacy, Numeracy and Digital Literacy (LLND) assessment. This identifies training needs, previous education, relevant experience and course suitability. The review may be conducted by video or phone call.
Other Conditions
- Allow approximately 4 hours per week for self-directed learning and assessments during training weeks, excluding term breaks.
- Use personal protective equipment (PPE) appropriate to each practical activity, including eye and hearing protection, suitable gloves, safety boots, high-visibility clothing, head protection and protective clothing. Respiratory protection, sun protection and fall-arrest equipment are used where required for the activity.
Learning Pathways
After successful completion, learners may consider further study, subject to the entry
requirements of the receiving provider:
- CPC40120 Certificate IV in Building and Construction
- CPC50220 Diploma of Building and Construction (Building)
Career Pathways
Potential occupational pathways include:
Roof plumber
Roofing contractor
Metal roofing installer
Roof drainage installer
Wall cladding installer
Employment and contracting opportunities depend on individual skills, experience, employer requirements, and applicable licensing or registration. Austra College does not guarantee employment, job placement, or business outcomes.
Duration
Full-time over a period of 52 weeks, inclusive of 4 weeks of holiday breaks.
- Classroom sessions are 20 hours per week during training weeks.
- Self-directed learning: approximately 4 hours per week during training weeks.
Training support is available after class or by appointment, in person, by phone, video call, or by email. Trainers and assessors monitor guided learning.
Fees
| Tuition Fees | $16,500 |
| Non-Tuition Fees | |
| Application Fees | $500 |
| Material Fees | $3,000 |
| Total Course Fee | $20,000 |
Course Outline
To attain the CPC32620 Certificate III in Roof Plumbing, students must complete 23 units of competency: 20 core units and 3 elective units.
The course includes the following units. C = Core; E = Elective.
| Core Units | ||
| No | Unit Code | Unit Title |
| 1 | CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry |
| 2 | HLTAID011 | Provide First Aid |
| 3 | CPCCCM2043 | Carry out WHS requirements |
| 4 | CPCCPM3024 | Prepare simple drawings |
| 5 | CPCCCM2055 | Work safely on roofs |
| 6 | CPCCCM2012 | Work safely at heights |
| 7 | CPCCCM2008 | Erect and dismantle restricted height scaffolding |
| 8 | CPCCCM3001 | Operate elevated work platforms up to 11 metres |
| 9 | CPCCPM2040 | Read plans, calculate quantities and mark out materials |
| 10 | CPCCCM2041 | Work effectively in the plumbing services sector |
| 11 | CPCCCM2047 | Carry out levelling |
| 12 | CPCCPM2048 | Cut and join sheet metal |
| 13 | CPCCPM3021 | Flash penetrations through roofs and walls |
| 14 | CPCCPR2022 | Select and install roofing and wall cladding |
| 15 | CPCCPR2023 | Collect and store roof water |
| 16 | CPCCPR3022 | Fabricate and install roof drainage systems |
| 17 | CPCCPR3023 | Fabricate and install external flashings |
| 18 | CPCCPR3024 | Install roof components |
| 19 | CPCCPR3025 | Install roof coverings to curved roof structures |
| 20 | CPCCPR3026 | Install roof sheets, wall cladding and complex flashings |
| Elective Units | ||
| No | Unit Code | Unit Title |
| 1 | MEMI3015 | Work safely and effectively in manufacturing and engineering |
| 2 | CPCCBP3015 | Install acoustic and thermal environmental protection systems |
| 3 | CPCCCM2049 | Cut mild steel using oxy-acetylene equipment |
Applicable unit prerequisites must be met as part of the training and assessment sequence.
Delivery Mode and Assessment
The course uses a blended delivery model, combining face-to-face classroom sessions, guided learning, theory assessments completed at home and practical training in a simulated workplace environment.
Assessment includes knowledge tests, practical demonstrations, simulations and role plays, as required by each unit. Summative theory assessment is completed outside the classroom. Practical assessment takes place in classroom and simulated environments suited to the unit requirements.
The qualification is awarded only when all required units have been successfully completed. Course completion is not guaranteed.
Recognition of Prior Learning (RPL) and Credit Transfers (CT)
Recognition of Prior Learning
Students may apply for Recognition of Prior Learning (RPL) based on relevant formal study, non-formal training and skills developed through work or other experience. Evidence is assessed against the requirements of the relevant units.
Apply before or immediately after enrolment, and before delivery of the relevant units. Contact Austra College for the RPL policy, procedure and qualification-specific RPL kit.
To learn more about how RPL is conducted, please refer to the following documents:
RPL policy and procedure
RPL kit for the qualification
How prospective learners will be made aware of RPL
Prospective learners will learn about the RPL policy and process before enrolment through the website, the student handbook, the pre-training review, and at the enrolment and course commencement stages.
Credit Transfers (CT)
Austra College recognises Australian Qualifications Framework qualifications and Statements of Attainment issued by other registered training organisations. Students seeking credit transfer must provide verifiable evidence, such as a statement of results, before or during enrolment.
Delivery Locations
| Location | Description |
|---|---|
| Melbourne | |
| Level 5, 131 Queen Street, Melbourne VIC 3000 | Classroom |
| Sydney | |
| Level 2/133 Parramatta Road, Granville NSW 2142 | Classroom |
Simulation workshop details will be provided to students at least 1 week before classes commence.
About this qualification
CPC32620 Certificate III in Roof Plumbing is suitable for international students aged 18 years or older who want to develop skills in roof plumbing and can attend regular face-to-face classes in Melbourne or Sydney.
Training covers reading plans, preparing drawings, measuring and marking out materials, cutting and joining sheet metal, installing roof sheeting and wall cladding, and fabricating roof drainage systems and flashings.
Students also study safe work practices for roofs, working at heights and access equipment.
Demand for skilled trades like roof plumbing is rising, as covered in our guide to the Australian construction worker shortage in 2026.
Looking at other trade options? Explore all Austra College courses.
